The Screamer 60mm PWM Fan Kit (2-Fan Pack) for Solo Miner – Delta 9000RPM

The Screamer 60mm PWM Fan Kit – 2-Fan Pack for Solo Miner

This kit is a 2-pack of our 60×60×25mm Delta 12V PWM “Screamer” fans, built for Solo miner owners who want serious airflow and don’t care about noise.

Each fan runs at roughly 9000RPM, pushing about 50.4CFM at around 55dBA, using a double ball bearing design for 24/7 operation. They’re the same fans used in our Screamer single-fan kit and Screamer replacement fan.

Use this kit to:

• Upgrade two Solo miners

• Keep one installed and one as a spare

• Build custom shrouds or enclosures that need 60mm PWM fans

To make installs easy, the kit includes fan grills with dust filters, 4-pin extension cables, and M3 mounting hardware.

Power & Safety Note

Each fan draws about 1.1A at 12V (~13.2W). We do not recommend powering two Screamer fans directly from Solo miner fan headers at the same time.

• For two separate Solo miners → plug one fan into each miner, as with the single Screamer.

• For two Screamers on the same rig, we recommend:

  • Powering the fans from a separate 12V brick or bench supply, and

  • Using the miner’s fan header(s) only for PWM and RPM signals, not for full fan power.

This keeps the heavy fan current out of the miner’s small traces and MOSFETs while still letting the miner control fan speed.

 

What’s Included – Screamer 2-Fan Pack

• 2× 60×60×25mm 12V 4-pin PWM fans (Delta, Screamer profile)
• 2× Fan grills + foam dust filters
• 2× 4-pin PWM fan extension cables
• 8× M3×35mm screws
• 8× M3 hex nuts

 

 

Note: This kit uses 12V PWM fans and is not plug-and-play on 5V-only miners (e.g., Bitaxe) without a separate 12V fan power source.

 

Fan Specs
Size	60 × 60 × 25 mm (6025)
Speed	9000 RPM
Airflow	50.4 CFM per fan
Noise level	55 dBA
Voltage	12 V DC
Current	~1.1 A per fan (~13.2 W)
Bearing	Double ball bearing
Connector	4-pin PWM
Rated life	Rated life (25 °C) ≥10,000 hours
Kit Contents
Fans	2× 60mm 12 V PWM fans
Accessories	2× metal fan grills, 2× 4-pin fan cables
Hardware	M3×35 mm screws and M3 hex nuts included
Packaging	Compact kit box (≈15 × 15 × 5 cm)
Compatibility
Miners	Solo miner rigs with 12V PWM fan headers (not for 5V-only miners such as Bitaxe)
Recommended power (dual use)	Use external 12V supply for fan power; miner header(s) for PWM/RPM only

 

 

View more mining accessories in our Shop.